Activate the Wahoo RPM Cadence by shaking it for a few seconds or if attached to your bike, spin the wheel a few times. Select “Saved Devices” icon on the top action bar. Select the plus “+” icon to add a new sensor. Choose your Wahoo RPM Cadence from the list of available sensors.
Why is my Wahoo cadence not working?
For troubleshooting, re-position the magnets and sensors such that the magnets pass over the indicator notch lines, then test in the Wahoo app. If you still have issues, it’s sometimes useful remove the sensor from the bike, then manually pass the magnet over the sensor by hand to test for a change in response.
How do you wake up Wahoo sensors?
Download the Wahoo Fitness app from the App Store. Open the Wahoo Fitness app. Make sure you have Bluetooth turned on. Wake up your Blue SC by rotating your rear wheel or crank arm until the magnet passes by the sensor.
How do I reset my cadence sensor?
Reset the Sensor –
- Remove the battery.
- Flip the battery upside down and reinstall.
- Leave battery installed upside down for 3 seconds.
- Remove the battery and reinstall correctly.
- Replace the battery cover.
How does the wahoo cadence sensor work?
Unlike traditional cadence sensors, the RPM does not use a magnet to detect crank rotations. Instead, a 3-axis accelerometer is used to determine the location of the crank arm and thus your RPM. A simple and elegant way to track your cadence.
How do you set a Wahoo sensor?
How to Pair your cycling sensor to the Wahoo Fitness app (iOS):
- Open the Wahoo Fitness app for iOS.
- Ensure your sensor is awake.
- Select the sensor icon in the bottom left corner.
- Select “Add New Sensor”
- Choose your sensor from the list of available sensors.
- Once connected to the correct sensor, select “Save Sensor”
What does red light mean on Wahoo speed sensor?
The Red LED represents wheel revolutions. You will see one red blink per wheel turn. * If a firmware update is available for your sensor, the Wahoo Fitness app will now prompt you to proceed with performing an update. If you do not, the update may be performed later.
How long do Wahoo sensor batteries last?
CR2032 replaceable coin cell battery. Lasts up to 12 months. No recharging.
Does wahoo cadence sensor measure distance?
A: The wahoo RPM cadence does not track distance on a stationary bike.
Where do I put wahoo cadence sensor?
The RPM Cadence Sensor is designed to mount on the inside of the non-drive side crank arm. Placing it on the outside of your crank arm can cause interference by scraping against your shoe.
Does wahoo cadence sensor work for running?
The Wahoo Fitness app actually allows you to use the same sensor for running cadence measurement for treadmill or outdoor running profiles. It’s not a running sensor at all, it’s a sensor for a bike.
Do you need both a speed and cadence sensor?
The speed-only sensor determines the speed and distance of a trip based on the wheel circumference of a bike. The cadence-only sensor only senses rotations per minute of the crank arm. The speed/cadence combo is the most popular, providing both types of data to cyclists through a combination of sensors.
How does Wahoo Elemnt measure speed?
Speed is calculated using GPS data by default, but a standalone speed sensor can be paired which will override GPS data and generally improve accuracy – especially when GPS data is affected by the factors described below.
How do I connect my wahoo cadence sensor to my Garmin?
Pairing the Sensors with Your Device
- Bring the Garmin compatible device within 3 m (10 ft.) of the sensor.
- Stay 10 m (33 ft.) away from other wireless sensors while pairing.
- Rotate the crank arm or wheel two revolutions to wake up the sensor.
- If available, pair the sensor using ANT+ technology.
Does Wahoo Kickr come with cadence sensor?
By design, the KICKR itself measures and transmits speed and power data, and now with KICKR ’18 or KICKR CORE updated to the newest firmware, also calculates cadence. Because of this, new KICKRs no longer come with our RPM / Cadence sensor included.
Is Wahoo speed sensor accurate?
The Wahoo Fitness app uses your phone’s GPS to provide accurate speed and distance data. GPS data can be slightly inaccurate when being used in areas with heavy tree cover, such as mountain biking. In these cases, we recommend the RPM Speed sensor or BLUE SC to provide more accurate speed and distance data.
How do I track my bike cadence?
To count your cadence, use a stopwatch to count the number of times your leg pushes down on the pedal for 30 seconds and multiply by 2. Or if that is too difficult to do while you ride, just count for 10 seconds and multiply by 6.
Does wahoo cadence sensor have a battery?
The Wahoo RPM Cadence Sensor (BT/ANT+) runs on an easy-to-replace CR2032 battery and features two LED lights that indicate device connection and cadence detection. It comes packaged with a pre-installed battery, rubber mount, zip ties, shoe mount, 3M double-sided tape, a quick start guide, and a product info guide.
Why do I need a wahoo cadence sensor?
Light, compact and easy to fit, the Wahoo RPM Cadence Sensor is an easy add-on for any cyclist wanting to be able to monitor their pedalling rate. The RPM uses an accelerometer which means you don’t need to attach a separate magnet to the chainstay, as needed by most other cadence sensors.
How do I connect my Wahoo?
Pairing to Android
- Ensure Bluetooth® and location services are enabled and open the ELEMNT Companion App for Android.
- After the introduction video, tap Start to pair your ELEMNT/BOLT/ROAM to the app.
- If prompted, enable access to the camera.
- Select Pair when the dialogue box appears to complete the pairing process.
How do you use wahoo cadence sensor on Strava?
Connecting a BTLE or ANT+ Sensor
- From the Wahoo Fitness app home screen, select Sensors > Add New Sensor.
- Find the sensor you wish to add from the list of nearby sensors. Choose a workout profile you would like the sensor to be active on or create a new one.
- The sensor should now be paired.
- Select Done.