How Do I Connect My Wahoo Cadence Sensor?

PAIRING TO THE WAHOO FITNESS APP (IOS)

1. Download the Wahoo Fitness app from the App Store.
2. Make sure Bluetooth is turned on and open the Wahoo Fitness app.
3. Activate RPM Cadence by shaking it for a few seconds or spinning the crank.
4. Select “Sensors” in the bottom left corner.
5. Select “Add New Sensor”.

How do I connect my Wahoo cadence sensor to my phone?

How Do I Pair a Sensor to the Wahoo Fitness Android App?

1. Open the Android Wahoo Fitness app.
2. Ensure your sensor is awake.
3. Select the sensor icon in the upper right hand corner.
4. Add a new sensor by selecting the plus sign in the upper right hand corner.
5. Choose your sensor from the list of available sensors.

Why is Wahoo cadence sensor not working?

For troubleshooting, re-position the magnets and sensors such that the magnets pass over the indicator notch lines, then test in the Wahoo app. If you still have issues, it’s sometimes useful remove the sensor from the bike, then manually pass the magnet over the sensor by hand to test for a change in response.

How do I connect my wahoo cadence to my Iphone?

How to Pair your cycling sensor to the Wahoo Fitness app (iOS):

1. Open the Wahoo Fitness app for iOS.
2. Ensure your sensor is awake.
3. Select the sensor icon in the bottom left corner.
4. Select “Add New Sensor”
5. Choose your sensor from the list of available sensors.
6. Once connected to the correct sensor, select “Save Sensor”

Where do I put the Wahoo cadence sensor on spin bike?

The RPM Cadence Sensor is designed to mount on the inside of the non-drive side crank arm. Placing it on the outside of your crank arm can cause interference by scraping against your shoe.

Does Wahoo cadence sensor work with Peloton app?

It also keeps a record of your workouts. A recent upgrade to the Peloton app allows riders to display their cadence and heart rate directly to the tablet instead of needing to use the Wahoo app.

Does Wahoo cadence sensor have a battery?

The Wahoo RPM Cadence Sensor (BT/ANT+) runs on an easy-to-replace CR2032 battery and features two LED lights that indicate device connection and cadence detection. It comes packaged with a pre-installed battery, rubber mount, zip ties, shoe mount, 3M double-sided tape, a quick start guide, and a product info guide.

How do I reset my Wahoo cadence?

Reset the Sensor –

1. Remove the battery.
2. Flip the battery upside down and reinstall.
3. Leave battery installed upside down for 3 seconds.
4. Remove the battery and reinstall correctly.
5. Replace the battery cover.

How does Wahoo cadence sensor work?

Unlike traditional cadence sensors, the RPM does not use a magnet to detect crank rotations. Instead, a 3-axis accelerometer is used to determine the location of the crank arm and thus your RPM. A simple and elegant way to track your cadence.

How long do Wahoo sensor batteries last?

CR2032 replaceable coin cell battery. Lasts up to 12 months. No recharging.

Why is my Wahoo not connecting to my phone?

Try rebooting your Android device and, if possible, the Wahoo device. For Wahoo Smart Trainers ensure you disconnecting the power for 30 seconds. In the Android system settings, go to the Apps section and tap the 3 dots in the top right corner to select “Show system” and find the “Bluetooth” or “Bluetooth Share” app.

How do I connect my Wahoo?

Pairing to Android

1. Ensure Bluetooth^® and location services are enabled and open the ELEMNT Companion App for Android.
2. After the introduction video, tap Start to pair your ELEMNT/BOLT/ROAM to the app.
3. If prompted, enable access to the camera.
4. Select Pair when the dialogue box appears to complete the pairing process.

Do I need cadence on my bike computer?

Cadence sensors are a must for bikers and cyclists who want to maximize workout results. These devices allow cyclists to measure energy output in the form of rotations per minute (RPM), akin to a speedometer or pedometer.

Is the wahoo cadence sensor compatible with Garmin?

You’ll need a device, such as a Garmin or smartphone, that can communicate with the cadence sensor via either Bluetooth 4.0 or ANT+. I used the latter and the sensor quickly and easily synced with my Garmin Edge 500.

Can Apple Watch measure cycling cadence?

Using both iPhone and Apple Watch, you can track performance metrics like power, cadence and heart rate and will even let you stream live workout data to be displayed on smartwatch and smartphone.

Does wahoo cadence sensor measure speed?

How Does the Wahoo Speed and Cadence Sensor Work? Wahoo Speed and Cadence sensors universally attach without magnets, wirelessly integrate with Bluetooth and ANT+ compatible accessories, and track cycling speed and cadence in real-time.

Does wahoo cadence sensor measure distance?

A: The wahoo RPM cadence does not track distance on a stationary bike.

How do I open wahoo cadence?

How to Replace the RPM Cadence Battery

1. Insert a coin, screwdriver, or other tool in the indention on the side of the sensor to pry off the top face plate.
2. Remove the battery and replace it with another CR2032 coin cell battery.
3. Place the face plate back on the sensor.

How do you unpair a wahoo cadence sensor?

How do I Unpair an ELEMNT from My Phone?

1. Open the ELEMNT app.
2. Select the Settings page.
3. Scroll to the very bottom and select Unpair ELEMNT.

How do I connect my wahoo cadence sensor to strava?

From the Wahoo Fitness app home screen, select Sensors > Add New Sensor. Find the sensor you wish to add from the list of nearby sensors. Choose a workout profile you would like the sensor to be active on or create a new one. The sensor should now be paired.

What is Wahoo cadence sensor compatible with?

Wahoo Fitness supports all fitness and healthcare sensors that fully comply to the ANT+ standards, including bicycle power meters, weight scales, foot pods, heart rate monitors, and cadence sensors. Several fitness brands have standardized on ANT+, including Garmin and Timex.