Yes, the strings follow the radius of the fret board, BUT they need not all necessarily be at the same height above the fret board (as measured from the bottom of each string). For instance the E string may be slightly higher than the G string.
Should all strings be the same height bass?
Yes. The treble strings should be slightly lower then the bass strings on electric and acoustic guitars. I generally use a radius gauge to set the string height, and adjust it by feel from there. Treble strings are usually a little bit lower than the wound ones.
What height should my bass strings be?
Generally, the lowest string (E string in standard tuning) should be at 6⁄64 inch (2.4 mm) and the highest string (G string in standard tuning) should be at 5⁄64 inch (2.0 mm). If you play very technically and have a relatively light touch, you might prefer the strings to be closer to the frets.
How low should my bass strings be?
If the distance from the top of your frets to the bottom of your strings is short you have low action on your bass. As a general rule, low action is between 1/16th” and 9/64″, or 1.6mm to 3.5mm.
How do I know if my bass is too high?
The only thing that will really tell you if the action is too high is how comfortable it is to play. If it feels like it’s hard to move around because of the effort of fretting then it is probably too high for you. That being said, if you are fairly new to bass that might not be a good way to judge.
What is a dead bass string?
When they get old, you’ll also notice a pronounced lack of sustain and they will sound extremely dull. Many bass players describe the sound of dead bass strings as muffled or muddy. They look funky. Another telltale sign of strings gone bad is rust, dark spots, or other discolorations along the length of them.
What is considered high action on bass?
Just in case you’re unfamiliar with the term action, it refers to the distance between the strings and your fretboard. A bass with low action will have strings that are closer to the fretboard, while a bass with high action will have strings that are farther away.
How should bass strings sit at the nut?
How high should the nut be on a bass guitar? The nut height on a bass guitar should be set at 0.0030″ to 0.0045″, or 0.076mm to 0.11mm. This height is found by fretting your strings at the third fret and measuring the distance from the top of the first fret to the bottom of the strings.
Is my bass action too low?
Fret buzz and loss of sustain are typically symptoms of an action that is too low. If your bass just isn’t handling the beating you’re dishing out or you feel a loss of clarity in your notes, a higher action is probably going to be your next course of action.
Should a bass neck be straight?
Tune your bass strings accurately to your preferred tuning. You want the string tension to be the same as when you play. You’ll want to get your bass neck as straight as possible before the point where the strings start buzzing. This will depend on how hard you play the strings.
How do I stop my fret buzz bass?
Often to avoid fret buzz you need a little bit of relief in the neck, loosening the truss rod in the neck until it curves forward just a little. Whether you need to do this, and how much, depends on other things, especially how low you have your bridge saddles. The higher the saddles, the less relief you need.
Is bass easier than guitar?
Playing the bass requires a different knowledge base and skill set, so to speak. So no, the bass isn’t necessarily easier to play than the electric guitar. If you can’t play the guitar, then just play bass. This is somewhat connected to the myth above.
Should Kick be louder than bass?
The bass should be loud enough that the low end is big and powerful, but not so loud that it overpowers the kick drum. Remember to check your reference mixes often to make sure you’re staying on course. Once you have the bass level where you want it, don’t be afraid to adjust some of the other faders as well.
What dB should bass be at?
79-85 dB is a good level to monitor at when making adjustments to bass. More than 85 dB and the bass will feel louder, so you will bring the low end down in the mix which leads to a bass light mix. Quieter than 79dB and the low end will feel too soft which will lead to you boosting the bass too much.
What dB should kick be at?
How the balance of the drums in different genres look like?
| Element | dB LUFS Value | dBTP (True Peak) Value |
|---|---|---|
| Kick | –19 | -5.1 |
| Snare | -19 | -3.6 |
| Hi-hats | -25 | -8 |
| Vocals | -18 | -6.3 |
How often should I replace my bass strings?
every 3-4 months
Some people never change strings. James Jamerson never changed his strings and once said, “The funk is in the funk.” Other people who like a bright sound or play a lot may change strings once every week or two. For my average student I suggest they change or clean them every 3-4 months.
Why do you boil bass strings?
Boiling guitar and bass strings is a method of cleaning within their windings, between their outer layer and their core. The boiling water expands the winding and removes dirt from within the string, offering a deeper clean than surface-level wiping or applying string cleaning products.
How long do bass strings stay fresh?
Ordinarily, under normal usage, steel strings can last for 3 months or 100 playing hours in optimal conditions (bass strings could last a bit longer due to their density). Nylon strings, while not rusting, will lose considerable quality after 80 hours of playing time.
Do you need low action to slap bass?
Low Action
In fact, it may be the most important factor. Lower action puts the strings closer to the fretboard, making it much easier to bounce them off the frets. Using less force, you’ll be able to relax your hand more, play faster and add articulation to your sound.
How do you know if your action is too high?
There are two ways to tell if the action on your guitar is too high: intonation and feel. If your guitar’s intonation is out or the guitar feels awkward to play compared to other guitars, the action may be too high.
What does tightening the truss rod do?
Tightening the truss rod straightens the neck and consequently lowers the strings, which can create string buzz. However, string height is controlled at the nut and saddle, not in the neck. Likewise, a straight neck may also make a poor fret condition more noticeable.