Every skateboard wheel is equipped with two bearings. If you want, you can fill the space between them with a spacer.
Do all bearings fit all skateboard wheels?
Choosing the Right Skateboard Bearings
Regardless of wheel size, all skateboard bearings are the same size and will fit any skateboard wheel that Warehouse Skateboards sells. The universal measurements for bearings are 8mm (core), 22mm (outer diameter), and 7mm (width).
Why do skateboard wheels have bearings?
Skateboard bearings allow your wheels to spin. You need 2 bearings for each wheel and preferably a spacer in between. Skateboard bearings are universal, if they are the industrial standard of ‘608’ they will fit.
Do bearings make you go faster?
A higher rated bearing will NOT make you “go faster”, but the quality of a bearing does affect your roll out. The roll out is how long your wheels will continue spinning after you push off. A better bearing will keep you rolling longer, so you can put in less effort to cover the same amount of space.
Is it easier to Ollie with smaller wheels?
Smaller wheels accelerate faster compared to larger wheels which is great when you only have a short distance between you and an object you want to ollie stairs for example. You need to be able to get as much speed as possible in the least amount of time.
Is it OK to skate on the road?
In general, no. Skateboarding in the street is usually not legal. On busy streets, it’s also not safe and a bad idea. Some cities do recommend that skateboards ride in the bike lane on the street.
Can you skate on gravel?
You can skate over pebbles with the right wheels. Soft wheels (e.g. 77A – 80A) are soft enough to roll over small pebbles by squishing around them when rolling fast. Besides softness for cushioning, the bigger the wheels the better for rolling over pebbles, gravel, and small rocks.
How long do skate bearings last?
The average lifespan of skateboard bearings is 1 to 2 years if given proper care and maintenance. Bearings get tired too, and remember that too much of anything isn’t good at all. Too much wetness, sliding, and fast jumping will cause your skateboard bearings to wear out faster.
Can you skate without spacers?
Bearing spacers are totally optional; longboarders and casual skaters likely won’t put enough pressure on their boards to ever need them, though they are definitely a good investment if you want to slide, do a lot of tricks, and generally skate hard.
What size wheels should I get for a 8.25 deck?
52 – 55 mm
FIND THE RIGHT SIZE SKATE PARTS
| Deck Size | truck Size | Wheel Size |
|---|---|---|
| 8.0 | 7.75 – 8.25 Axles | 50 – 54 mm |
| 8.125 | 8.0 – 8.25 AXLES | 50 – 54 mm |
| 8.25 | 8.0 – 8.5 axles | 52 – 55 mm |
| 8.375 | 8.25 – 8.5 axles | 52 – 55 mm |
Should skateboard wheels wiggle?
Most importantly, they should be tight enough to resist wheel bite and speed wobbles. This makes for a smoother and safer ride. If you enjoy flexing tricks on the skate ramp as much as we do, keeping your wheels moderately tight is the way to go. Learning to flip a skateboard is probably every rider’s aspiration.
What bearings do pro skaters use?
There are a few different types of skateboard bearings that pros use, depending on their skating style and preferences. The most popular types are ceramic, Swiss, and titanium bearings. Ceramic bearings are made from a strong, lightweight material that is resistant to heat and friction.
Do skate bearings matter?
A higher rating means a bearing has a capability for greater speeds, but even the world record speed on a skateboard is not fast enough for the ABEC rating to make difference in skateboarding roll speed. TIP: The best skateboard bearings are clean, well-oiled bearings. If you want to go fast, keep ’em clean!
Why does my skateboard go so slow?
Dirt and dust buildup and cause friction, resulting in a slower skateboard. Sometimes you don’t even notice how much dirty bearings slow down your skateboard until you cleaned them or even replace them entirely. What is this? While you don’t need top-notch skateboard bearings, quality bearings make a difference.
How many seconds should skateboard wheels spin?
Give your skateboard wheels a free spin to see if it works as intended. Remember to aim for 10 to 30 seconds spinning skateboard wheels. In other words, your skateboard wheels should spin freely for at least 10 seconds without stopping. If it stops spinning before 10 seconds, your wheels are tightly placed.
Are big skateboard wheels faster?
This means a bigger skateboard wheel is faster and will cover more ground, once you get going. A smaller wheel however will accelerate quicker, so if you ‘push push push’ towards a ledge for a trick it is better, but won’t retain as much speed as a bigger wheel once rolling.
Are 101A wheels too hard?
The harder smaller skateboard wheels are mostly between 97A and 104A. The most popular wheels in this category are 99A to 101A. Hard wheels have a very slippery, plasticy feel. They are smooth and fast on smooth surfaces, but are chattery and unpleasant to ride on rough terrain.
Is 99a good for street?
For most street skating, wheels with a durometer rating of 99a and up are preferred. Harder skate wheels are more responsive, slide easier, and hold speed better on smooth surfaces.
Can I ollie with soft wheels?
If you’re interested in learning how to ollie, do some stationary kickflips or basic beginner tricks? Go with harder skateboard wheels. Soft wheels aren’t made for this.
Is skateboarding illegal in Japan?
In Japan, skateboarding is illegal on roads with frequent traffic and prohibited in most public areas. Riding a skateboard is not allowed in most places in big cities. Because of these restrictions, most skaters ride and practice tricks either at skateparks or secluded spots, like riverside paths.
Why is skateboarding banned in public places?
It can be noisy and destructive to property, and skateboarders may potentially harm themselves or other pedestrians. Many cities attempt to deter skateboarding and other “non-desirable” activities with hostile architecture.