between 2 and 9 knots.
Mahi Mahi are aggressive fish and will eat fast as well. Professionals tell you to troll for Mahi Mahi between 2 and 9 knots. Try varying speeds until you get a bite, but more importantly be consistent and make sure you keep the boat moving at a steady pace.
How fast do you go when trolling for fish?
Baits and lures are typically trolled at speeds up to 9 knots (17 km/h), though speeds up to 15 knots (28 km/h) can be used, particularly when boats are travelling to different fishing areas. The speed at which the lure is pulled through the water impacts on the fishing success.
What to speed to troll in Hawaii?
First, the average trolling speed is fast— typically 7.5 to 10 knots, and spreader bars do not respond well to that speed. Second, it is usually rough and windy off the coast of Paradise. Due to the persistent 15- to 25-knot trade winds, steep 4- to 6-footers out of the east are the norm.
How long does it take to reel in a mahi mahi?
Record Mahi-mahi
Frashure caught the record-setter off of Poor Man’s Canyon, taking nearly 20 to 30 minutes to reel onto the boat.
Is 3 mph too fast for trolling?
The best trolling speed depends on several factors including the type of fish, water conditions and lure choice. In general, trolling speeds between 1.5 and 2.5 mph, as measured by GPS, are a good starting place for most species like walleye, trout and salmon.
How far behind the boat should you troll?
20 feet to 150 feet
Proper distance for most boats will be anywhere from 20 feet to 150 feet behind your boat. Whether you have inboard diesel or outboard gas engines, your power dictates the distance you troll your baits and lures.
How fast should I troll?
Trout typically like faster trolling speeds around 1.5 to 2.0 mph. Slower speeds may work better in cold water in winter, but generally trout are looking to chase forage items. Let the fish determine what speed will entice the bite. Start at 1.5 mph and troll in S-patterns.
Should you troll with or against the current?
When in an area with current, troll crosscurrent as opposed to with and/or against the current. Going crosscurrent, you don’t have to worry about how the current is affecting your lure’s or bait’s speed through the water. Plus, fish generally swim into the current.
How fast do you troll for dolphin?
Professionals tell you to troll for Mahi Mahi between 2 and 9 knots. Try varying speeds until you get a bite, but more importantly be consistent and make sure you keep the boat moving at a steady pace.
What is the best bait for mahi mahi?
They can be caught on sabiki rigs under large sargassum patches, and these hardy fish are irresistible to mahi. Pilchards, ballyhoo, cigar minnows and others can also make great baits. If you prefer to use artificial lures, bucktail jigs and lipped plugs can sometimes work just as well.
What depth do you catch mahi mahi?
Mahi-mahi are a blue-water, open ocean, highly migratory schooling fish found around the world in tropical and subtropical waters at depths up to 85 metres (279 ft), but more typically near 37 metres (121 ft).
How far offshore do you have to go to catch mahi?
As shallow continental shelf waters start to warm in the summer, mahi-mahi moves closer to shore and are occasionally seen within 10 miles of the shoreline. They are also found near the coast, ranging in depths from 0 to 279 feet of water.
What is the best time to fish for mahi mahi?
Mahi Mahi doesn’t have a closed season so they are available for harvest year-round. The best time to target mahi mahi is from April through June.
Where is the best mahi mahi fishing in the world?
Mexico. Mexico has been named the maritime capital of the world and one of the top mahi mahi fishing destinations . The peak months are between May and December.
Do you need to bleed mahi mahi?
Try to keep them from beating the meat up as they come on the boat. Stick them in a kill bag or cooler to calm them. Once they calm down pull a gill raker and make sure the drain plug is open on bag or cooler. Bleeding them is key and letting them stay on ice to firm the meat up works well.
How do I slow my boat down for trolling?
Shut Down Your Boat’s Engine(s)
With triple outboards, for example, shutting down the center engine (or leaving it in neutral) will help you troll slower. If that’s not slow enough, use just the center outboard and turn off the two outside motors. With quad outboards, try running just two motors.
Can you troll with bottom bouncers?
A good trolling speed for bottom bouncer fishing ranges from 1.0 MPH to about 1.5 MPH. Speeds this slow are going to require a small gasoline kicker motor or an electric trolling motor.
How do you mark a fishing line for trolling?
Buy some rod wrap thread. Then measure where you want to mark. Palce a drop of super glue there. Take the rod wrap thread and make a series of half hitches (10-15 should be fine) with the rod wrap thread in the glue aroung the braided line.
How much line should you let out when trolling?
spread all your lines throughout the water column, c) set the bulk of your lines to run at 20 feet, know for a fact that’s where they’ll actually be, and make sure a few lines are running shallower and deeper than that depth to cover all the bases until you get a bite or three and can adjust accordingly.
Should you troll with or against the wind?
Trolling with the wind is the most important. You are able to maintain your speed better when motoring downwind than if you were bucking waves head on. Also, when heading into the wind, gusts of wind will grab the nose of your boat, whether it’s aluminum or fiberglass, and spin you off course.
Is braid or mono better for trolling?
Mono holds knots better and costs less than braid. It also works better on smaller bait-casting reels because light braid can dig into itself. Florida sailfish and dolphin anglers still use a lot of mono on the troll, and some use it for kite lines because it runs through the clips better.