This is a good question and there is a simple answer, the basic rule to always remember is ‘Kingpin in’. When looking down at your board, both truck kingpins should be facing each other, and your truck hangers will be facing outwards on the nose and tail. This is the only way your trucks will work and turn together.
Which way should trucks face on a longboard?
Longboard trucks are usually reversed kingpins (the center bolt on which the hanger pivots), meaning the kingpin faces outwards. Standard kingpin trucks for short boards sit with the screw facing inside to protect it from grinds and whatnot.
Is there a front and back skateboard truck?
It is important to mark which truck is your back truck and which is your front tuck before removing both from your previous set up. If the trucks are misplaced on the new skateboard, the board will feel as if it is backwards due to the adjusted bushings from the previous set up.
Does it matter which way the skateboard faces?
If your deck’s nose and tail are identical, then it’s designed to be ridden in either orientation. However, if you skate with one end forward all of the time, then your bushings, trucks, and the deck itself will wear down in that direction.
Do trucks face out or in?
The trucks should be placed so that the kingpin and the bushings of each face inwards, toward the other.
What happens when skateboard trucks are backwards?
If you put both truck on the wrong way, it will turn the wrong way – when you push down on the left side, it will turn to the right, when you push down on the right, it will turn left.
Which side of my skateboard is the front?
The front of skateboard is commonly known as the nose, while the back part is called the tail. You can find the nose in the front part of the skateboard, while the tail is in the rear part.
How can you tell nose from tail?
If the end of the skateboard is smaller, then it is the tail, and the larger part is the nose. Another term for the nose is “catch” because it actually catches your foot when you do an Ollie.
What is the difference between reverse kingpin and regular trucks?
Reverse-kingpin trucks are named so because the kingpin is on the opposite side of the axle as opposed to traditional skateboard trucks. In terms of ride, reverse-kingpin trucks tend to turn much more than traditional trucks making them better for carving and lean turning as opposed to kick-turning.
Can you flip skateboard trucks?
Flipping your trucks is easy. First of all, you are not changing the baseplate at all. There’s only one nut to unscrew here. You’ll want to remove the kingpin nut, washer, and first bushing.
What do reverse kingpin trucks do?
Reverse Kingpin: These trucks have the kingpin sitting though the hanger. They are used for longboarding, downhill, carving, cruising, freeride, and freestyle. Reverse kingpin trucks sit lower and are more stable than standard trucks.
Do you skate nose or tail?
Some skaters prefer skating the nose of a skateboard over the tail, and vice versa. The reason behind this comes down to preference. In general, the tail is used over the nose as by design, is shorter allowing for a nice pop, especially when learning Ollies.
What are inverted skateboard trucks?
The truck can be tightened with either a 5.5mm Allen wrench or the classic 9/16 hex wrench. Inverted Kingpin – An inverted kingpin means the threads are in the trucks, meaning that even after prolonged grinding, you will always be able to tighten or loosen your trucks.
Why do longboards have the trucks backwards?
Even for flexible decks, it’s important to invert your wheels. This stops your board from riding too low to the ground, causing your board to touch concrete whenever you turn. Also, inverting your trucks can help prevent speed wobbles. Longboards have huge trucks that are extremely sensitive.
Why is it so hard to turn on my skateboard?
If your deck barely tilts, it means you have tight trucks, which will make it difficult to turn. If your board tilts easily, it means your trucks are loose; while looser trucks make turning easier, they also make your deck unstable and difficult to control.
Why does my skateboard go the opposite way?
Your skateboard turns on its own because of bad bearings, squashed bushings, coned wheels, loose screws, loose trucks, bent axles, or it could even be your skateboard deck. Some boards turn to the right where others turn to the left on their own.
Why is it hard to turn on my skateboard?
Adjust your board to make turning easier.
If you find that it’s difficult to perform leaning turns on your board, it may be because your trucks are too tight. Use a crescent or socket wrench to take a little tension out of the nut that secures and tightens the trucks.
Which end is the tail of a skateboard?
back kicktail
Description: The nose is the front kicktail of your skateboard. It is usually slightly broader than the tail. Description: The tail is the back kicktail of your skateboard. It is usually slightly smaller than the nose.
How do you ollie higher?
Jumping higher is what will help you get your ollies higher. To get up higher, you’ll need to pop the board harder, suck your feet up with the board, and jump higher than normal, trying to get your knees almost all the way up to your chest. You can raise your arms a bit more to help yourself get that extra lift too.
Which way do you ride a skateboard?
There are two stances for skateboarding: regular and goofy. Regular means that you skate with your left foot forward and push your board with your right foot. Goofy means that you skate with your right foot forward and push with your left foot.
Are skateboards symmetrical?
Both ends of the skateboard deck are “symmetrical” in both shape and pitch. This means you can skate it either way without a designated nose or tail.