It can include a ratchet, grip tape, axle re-threader, t-tool, y-tool, Phillips screwdriver and Allen head. A tool kit can keep everything you need in one place and can include multi-functional tools to fit all different sizes of skateboards.
What tool do you need for skateboard wheels?
The skate tool is the skateboarder’s Swiss Army knife. It allows you to mount hardware and adjust components on the fly. Need to change your wheels, tighten the screws up, change the grip tape, repair the screw thread, or clean the bearings?
Is a skateboard tool necessary?
A skate tool is worth it because it saves you a lot of time assembling the different parts and maintaining components. They don’t take up much space and is an essential piece of gear any serious skater should carry.
What is a skate tool called?
The skate wrench comes in many different shapes and sizes but is essentially the same regardless. Most skate wrenches will be comprised of 4 main components: 1) Kingpin adjustment: this will be the largest gauge socket on your skate wrench and is used to tighten or loosen your kingpin.
Do you need a skate tool to build a skateboard?
Assembling your trucks, the way I do it. Tools you need: A skate tool or a 1/2″ socket/wrench, an Alan wrench or Philips screwdriver. Hold the nut one side and on using a screwdriver or Allen wrench (depending on the type of bolts) to lock the bolt on the other side.
What tool do you use to tighten skateboard trucks?
Use a skate tool or other useful tool to tighten or loosen the big nut in the center of the truck. This single bolt controls the tightness of the trucks. It points directly to the ground when you’re skating, and is found between the wheels. Turn it clockwise to tighten the trucks, getting tighter turning.
What size wrench do I need for skateboard trucks?
It requires a 3/8″ wrench, good enough to tighten the nuts on the deck bolts.
Are all skate tools the same?
There are many different options when it comes to skate tools, and they do not all perform the same function.
What size are skateboard tools?
The skateboard T tool includes 3 different sizes of sockets (3/8″, 1/2″, 9/16″). It works with most types of the skateboards and long boards to adjust axle nuts, mounting hardware, and the kingpin nut on the top of the truck.
How do you get a screw out of a skateboard tool?
Using the flat side of your skateboard trucks, press against the ends of the screws and pop them out. This should work. If your screws still won’t come out, try using a hammer, and be sure to not re-use that set of hardware.
Is it hard to build a skateboard?
Making a skateboard is, surprisingly enough, not as hard as most people think. Making the deck, or wooden board, only requires a basic knowledge of carpentry, a jigsaw, a skateboard mold, and a vacuum press, but even these can be made at home with a little patience.
How do you loosen skateboard trucks without tools?
As an alternative to the skate tool, take out:
- Wrench – Designed to tighten bolts and nuts.
- Pliers – Pliers may also be used; just be sure that it is enough to grip the nut on both sides, so you can tighten it or loosen it regarding your preference.
Is it better to skate loose or tight?
The faster you intend on riding, the tighter your trucks should be. Tight trucks provide stability at higher speeds, reducing the likelihood of catching the dreaded speed wobbles. If you’re considering riding downhill, or if a vert ramp session is in your future, consider tightening your trucks for safety’s sake.
What bushings should I get?
There are a lot of different types of bushings but not all are suitable for every skateboard. If you ride a regular skateboard barrel/cone bushings with a hardness between 87A and 92A should be fine. Heavier riders should consider 94A, kids need softer bushings, 85A to 90A should work for most kids under 12.
What do T tools do?
Features: The T-tool helps you to set-up your deck with hardware, wheels and trucks. It includes 3 sizes of sockets and a slide-out and Allen head screwdriver that fits. Into the top of the handle when not in use.
Can you use skateboard tool on roller skates?
This multi-functional skateboard T tool is designed for repairing, installing, adjusting and disassembling for all kinds of skateboards, long-boards, roller skates, inline skates, scooters. With three hexagon sockets of 3/8″, 1/2″ ,9/16″, this T-tool for skates can be used for trucks, hardware and wheels.
What size is a skateboard wheel nut?
The axle nuts are the standard size and will fit on all skateboard/longboard trucks that have 8mm axles (virtually every truck has the standard 8mm axle size). The thread size for these axle nuts is 5/16″.
What size is a skateboard kingpin nut?
These kingpin nuts are Produced with top quality materials and are standard size and will fit on most skateboard/longboard trucks that have standard kingpins. The thread size for these kingpin nuts is 3/8″ (standard).
What size is a skateboard axle?
The Axle will be wider than the hanger width, the exposed axle will typically measure around 1.375″ / 35mm each side or 2.75″ / 70mm combined (Fig 2.).
What does a Rethreader do?
Damaged axles prevent you getting a wheel nut back on because that opening line of thread is no longer there for them to line up with. This is easily fixed with the rethreader tool which cuts through the damage and replaces the lost thread from the edge.
Who invented the skate tool?
In 1975, Al Hess watched the skateboard business explode. Al owned a machine shop and, at that time, there wasn’t a tool for the skateboard, but he could make it. Al was our buddy, so we all sat down, put in our two cents and he flew with it.