Shock pads are recommended for those who ollie huge stairs. They help to absorb impacts and prevent pressure cracks. There is a reason why you never see skateboarders riding 1/2″ riser pads, it’s meant for longboarding not skateboarding. If you want to setup your own cruiser and hop a few curbs, risers are recommended.
What do shock pads do?
Cushioning for rough pavement
Even the softer longboard wheels transmit some of the vibrations from rougher pavement. Shock pads absorb much of those vibrations before they can reach the board and get transferred to your feet. The cushioning isn’t noticeable in the sense of feeling soft.
Do skateboarders use riser pads?
Skateboard decks that use wheels smaller than 55mm do not typically require risers; however, even 1/8″ risers can help keep your hardware in place. Skateboard decks that use wheels smaller than 55mm do not typically require risers; however, 1/8″ risers can help keep the hardware from vibrating loose.
Are shock pads necessary Reddit?
It’s usually not necessary unless you are having problems with wheelbite. Shock pads do help absorb some of the road vibrations though.
Are risers necessary on a longboard?
Do I need riser pads or risers? The larger the wheels, the more chance you have to get wheel bite. Nowadays longboards has wheel wells (a cutout in the deck) allowing for more space for your wheels, but most longboards still need risers to make sure the wheel doesn’t touch the deck.
Do I need risers for 55mm wheels?
Risers are usually recommended for larger wheels 55mm and above, and while not necessary for smaller skate wheels, 1/8″ shock pads can always be used to help reduce vibration and stress cracks to your board.
Are skateboard risers necessary?
Skateboarder using normal popsicle decks typically use risers to prevent wheel bite after they land a skate trick to prolong the life of their board. If you are wheels are 55mm or smaller, you may not need riser pads.
Do riser pads absorb shock?
Although risers will absorb a bit of shock, the softer material in shock pads is designed specifically for shock absorption. The hard plastic of riser pads ensures that the pad will never compress and lose height. The third difference between risers and shock pads is the speed you can get.
Are shock pads necessary skateboard?
Shock pads are rectangular-shaped washers that are placed between the trucks and deck of a skateboard. Shock pads aren’t necessarily a crucial component, but they can be quite helpful in solving some common problems.
Are shock pads necessary longboard?
Risers (or shock pads more specifically) will help protect your deck from unwanted wear-and-tear due to the trucks rubbing and slamming against the deck. We recommend using a set of ⅛” Khiro Shock Pad for drop platform decks and a set of ⅛” Khiro Drop Through Shock Absorbing Strips for drop-through decks.
Do risers make tricks harder?
Riser pads are fine for skateboards as long as you stick with 1/16″ shock pads or 1/8″ riser pads. While they prevent wheel bite, they also make landing tricks a lot harder and make your ride very unstable. It’s better to get smaller wheels instead of adding risers.
What size trucks do you need for a 8.25 board?
Which trucks do I need? If you’re setting out to buy new trucks, you’ll find that each brand labels trucks differently. That means if you ride an 8.25-inch board then you’d need Independent 144s, Thunder 148s or Venture 5.6s (each have an axle length of 8.25-inches).
How do you stop your skateboard from vibrating?
Shock pads
They are usually made from rubber or dense foam to absorb some of the bumps and vibrations from rough roads. The softer material will have better shock absorption effect than hard plastic materials. Put the shock pads between the truck and board. The reduction in vibration is very noticeable.
What size wheels should I get for a 8.25 deck?
52 – 55 mm
FIND THE RIGHT SIZE SKATE PARTS
| Deck Size | truck Size | Wheel Size |
|---|---|---|
| 8.0 | 7.75 – 8.25 Axles | 50 – 54 mm |
| 8.125 | 8.0 – 8.25 AXLES | 50 – 54 mm |
| 8.25 | 8.0 – 8.5 axles | 52 – 55 mm |
| 8.375 | 8.25 – 8.5 axles | 52 – 55 mm |
Do I need risers for 54mm?
If you skate wheels over 54mm we advise you to consider a riser because the distance between your wheels and board needs to be increased a little which is where the riser pad comes into play.
What grip tape is the best?
Best Skateboard Grip Tape of 2022
- Best Overall: Mob Grip Tape.
- Best Value: Jessup Grip Tape.
- Best Clear Grip Tape: Mob Clear Grip Tape.
- Best for Speed: Jessup Ultra Grip Tape.
- Best for Style: Spitfire Swirl Clear Grip Tape.
- Best for Longboards: Globe Slant Extra Rugged Grip Tape.
- Best for Cruisers: Mob 11” x 33” Grip Tape.
How does wheel bite happen?
The dreaded wheel bite occurs when a wheel comes into contact with the deck during a turn, stopping the forward motion. This causes a rider to loose balance and/or fall off the board. Thankfully, this issue can be avoided.
What are the fastest bearings for skateboards?
What are the fastest bearings? The fastest skate bearings in the world are brand new bearings, or bearings that you have just cleaned. We stock Bones Bearings, Zealous Bearings, Bronson Bearings and Sabre Bearings. You really don’t need anything else.
What size trucks do I need for a 9 deck?
Skateboard Truck & Wheel Size Chart
| Truck Size | ||
|---|---|---|
| 8.25″ | 5.5 | 8.0 |
| 8.5″ | 5.85 | 8.0/9.0 |
| 8.75″ | 9.0 | |
| 9″ | 9.0 |
How do you stop a wheel bite?
How To Prevent Wheelbite?
- Tighten Trucks. The next logical solution would be to tighten your trucks.
- Swap Bushings. As you probably guessed, the next step would be a bushing swap.
- Downsize Wheels. Another thing you could consider is to swap out your wheels with smaller ones.
- Add Riser Pads.
- Make Wheel Wells.
What size boards do pros ride?
An 8’5” Skateboard Deck is the Pro-Choice
There is no doubt that almost all professionals have opted for the 8’5” deck in their important rides. Even though this size is supposed to have a weaker controllability compared to other small boards such as 8” or even 7’75”.