A skateboard tool is a universal, multifunctional, T or Y-shaped tool with several pieces that come out and help you repair, tighten, or reassemble the skate or longboard.
Are all skate tools the same size?
The skateboard T tool includes 3 different sizes of sockets (3/8″, 1/2″, 9/16″). It works with most types of the skateboards and long boards to adjust axle nuts, mounting hardware, and the kingpin nut on the top of the truck.
Can you use skateboard tool on roller skates?
A tool kit can keep everything you need in one place and can include multi-functional tools to fit all different sizes of skateboards. These tools can even be used for longboards, penny boards, skateboard wheels, scooters and roller skates.
What size wrench do I need for roller skates?
Roller skate wrench has a 15.5cm handle and a 4.8mm hex head, combined into a T handle inline skate wrench.
What can I use if I don’t have a skate tool?
What is this? You don’t necessarily need a skate tool, but at the very least you need 3 different sized wrenches, 1 screwdriver, and 1 size of Allen key. The nice thing about a skate tool is that it has all of these tools built into 1 convenient and easy to carry tool.
Can you put a skateboard together without a skate tool?
Tools you need: A skate tool or a 1/2″ socket/wrench, an Alan wrench or Philips screwdriver. Hold the nut one side and on using a screwdriver or Allen wrench (depending on the type of bolts) to lock the bolt on the other side. Use your thumb and index finger and screw the bolts using your fingers.
Why do I need a skate tool?
It allows you to mount hardware and adjust components on the fly. Need to change your wheels, tighten the screws up, change the grip tape, repair the screw thread, or clean the bearings? All you need is a skate tool, the ideal gadget for your routine maintenance or unexpected repair needs.
What size are skateboard hardware?
The right size hardware for skateboard is 7/8″ for standard 7-ply decks without riser pads. 1/8″ riser pads require 1″ hardware and 1/4″ risers require 1 1/8″ hardware. Sometimes trucks have a thicker baseplate and 1″ is a better option. Both 7/8″ and 1″ flathead countersunk bolts always work.
How do I loosen my roller skates without a tool?
How to Avoid Tightening Your Wheels Excessively. If your skateboard wheels are excessively tight, roll them counter-clockwise to loosen them somewhat. Loosen one wheel at a time until it can spin freely by rotating it with your hand. Washers may also be used to prevent squeezing the wheel and bearing into place.
How loose is too loose for roller skate trucks?
Trucks should not be loose enough for you to be able to wiggle them with just your fingers, nor should they be so tight that you cannot move them at all with full hands on the wheels.
What size nuts are on roller skates?
Fit: Most modern roller skates including Moxi, Impala, Riedell, Sure-Grip, Chaya, Rio Roller etc have 8mm axles and take an 8mm axle nut. Older style skates, customs and some brands such as Roll-Line have 7mm axles and take a 7mm axle nut.
Can I use jam plugs to stop?
Jam plugs are used by skaters who do not need a toe stop. Jam plugs are very popular with skaters who do jam skating or other styles of roller skating where toe stops can get in the way. They are not designed to be used for slowing down or stopping roller skates.
What type of key is used to unscrew the skate axle?
Necessary tool: Allen key or a skate-tool (For some skates you might need 2 tools, one for each side of the wheel). Use the tool on the bolt that holds the axle.
Who invented the skate tool?
In 1975, Al Hess watched the skateboard business explode. Al owned a machine shop and, at that time, there wasn’t a tool for the skateboard, but he could make it. Al was our buddy, so we all sat down, put in our two cents and he flew with it.
How do I loosen my trucks on my skateboard?
How to adjust the trucks. To adjust skateboard trucks, get a skate tool, or a spanner, and adjust the kingpin. The kingpin is the largest nut on the truck. Turn clockwise to tighten, and anti-clockwise to loosen.
Is building a skateboard hard?
Making a skateboard is, surprisingly enough, not as hard as most people think. Making the deck, or wooden board, only requires a basic knowledge of carpentry, a jigsaw, a skateboard mold, and a vacuum press, but even these can be made at home with a little patience.
What size are skateboard truck sockets?
The classic skate tool usually refers to handy all-in-one unit with a 1/2” socket for your wheels, 9/16” for your trucks, 3/8” for the board screw nuts and a Phillips head.
How long does it take to set up a skateboard?
I’ve never timed myself setting up a skateboard, but I’m pretty sure it takes somewhere in the neighbourhood of 10-25 minutes, depending on your level of focus. I’ve also never had a problem setting up a board any other way; a unit tool or just, ya know, a regular socket wrench and screwdriver or drill.
What does a Rethreader do?
Damaged axles prevent you getting a wheel nut back on because that opening line of thread is no longer there for them to line up with. This is easily fixed with the rethreader tool which cuts through the damage and replaces the lost thread from the edge.
What tool do you use to tighten skateboard trucks?
Use a skate tool or other useful tool to tighten or loosen the big nut in the center of the truck. This single bolt controls the tightness of the trucks. It points directly to the ground when you’re skating, and is found between the wheels. Turn it clockwise to tighten the trucks, getting tighter turning.
How do you tighten skateboard wheels?
A socket or a ½-inch wrench is all you need to get the job done. Start by either tightening or loosening the Nyloc nut on the axle with your wrench or socket. Grip one of the wheels and shake it to determine if you got the right adjustment.