We recommend using a skate-specific bearing lubricant like Bones Speed Cream or Bronson Speed Co. High Speed Ceramic Oil. Drip 1-2 drops of lube into the bearing, then spin it to evenly distribute the oil. Repeat for all eight bearings.
Should I grease my skateboard bearings?
If you skate regularly, it’s a good idea to lubricate your bearings every few weeks. If you don’t skate often, you can get away with lubricating them once a month or so. If you start to notice that your bearings are making more noise than usual or feel less smooth, that’s a sign that they need to be lubricated.
Do I need to lubricate new skateboard bearings?
Buying New. In most cases, all you need to do is lube them and spin the wheels but, every once in a while, you need to give your bearings a full cleanup to revive their original characteristics and improve the skating experience.
How often should I lube my skateboard bearings?
about once every two to three months
Remember, bearings only need to be cleaned about once every two to three months depending on the environment you are skating in. If you primarily skate inside several times a month but the surface is not cleaned often, you might have to shine up your bearings once a month.
How do you put grease on skateboard bearings?
It’s actually terribly easy if you’ve done it once.
- Step 1: What You Need. Dirty skateboard bearings.
- Step 2: Pop the Seals.
- Step 3: Soak and Clean.
- Step 4: Optional: Filter and Save Your Acetone.
- Step 5: Grease and Re-seal.
- Step 6: You’re Done!
Is it OK to put WD40 on skateboard bearings?
It’s important to use a silicone-based lubricant. WD40 or others like it will dry out your bearings and attract dust and dirt. You can pick up a bottle of Bones Speed Cream at the skate shop, or try some Prolong from the auto parts store.
Can you use WD40 on bearings?
Yes, you can apply any kind of lubricant to the bearings. Be sure to dry any excess once you have sufficiently lubricated the bearings.
Do you lube new bearings?
FOR STARTERS, note that most sealed bearings come pre-greased from the factory with a 25%-35% grease fill. This is all the grease the bearings will ever need, because the relubrication interval (explained below) is longer than the expected life of the bearing. DON’T JUST GUESS.
Do bearings need to be broken in?
Why is Breaking In Your Bearings Important? For grease lubricated bearings, the break-in procedure is as important for the grease placement as it is for the bearing races. Proper greasing will place the grease between the balls and the raceway(s).
What can I use as lube for bearings?
Oil. Oil is the ideal method of lubrication for rolling element bearings.
How long do skate bearings last?
The average lifespan of skateboard bearings is 1 to 2 years if given proper care and maintenance. Bearings get tired too, and remember that too much of anything isn’t good at all. Too much wetness, sliding, and fast jumping will cause your skateboard bearings to wear out faster.
Why do my skateboard wheels not spin?
“New wheels are not going to help in the least if your wheels aren’t spinning. Chances are you just have to clean and lubricate your bearings. Remove your wheel and pop out the bearings with the edge of your axle. Bones Bearings pretty much set the standard in the skateboarding world as far as bearings go.
Can you use vegetable oil as lube for bearings?
Vegetable oil should NEVER be used to lubricate mechanical parts. It always leaves a solid deposit which later will be stuck to the parts you wanted to lubricate. Save this answer.
Can I use olive oil to lube my bearings?
Using solvents as lubricants
Remember that olive oil should not be used as a cooking oil on bearings. However, it is preferable to nothing, and far better than using a solvent.
How do you maintain bearings?
Here are seven tips for bearing maintenance to help ensure a longer lifespan.
- Handle with care. Bearings are delicate enough to get damaged quickly.
- Check the bearing housing and shaft.
- Mount the bearings correctly.
- Avoid preheating or overheating.
- Always use the proper tools.
- Avoid corrosion.
- Proper lubrication.
How do I stop my skateboard from squeaking?
The best way to eliminate this annoying noise is by taking a few shavings of bar soap or wax and dropping them into the empty pivot cup (make sure you take your hanger out first). Then just distribute the soap/wax around the pivot cup evenly with your pinky finger or the actual pivot of the hanger.
Can skate bearings rust?
That being said, sometimes bearings are beyond repair. It’ll be your call, but we recommend replacing the entire set if any rust or corrosion is present on any of your bearings (with the best skateboard bearings on the market, of course).
Is silicone spray good for bearings?
Figure 3: Silicone grease can be used to lubricate gears, valves, or machinery components such as bearings.
Is WD-40 a silicone lubricant?
Product Details
A multi-surface Silicone lubricant that lubricates, waterproofs and protects. WD-40 Specialist Silicone safely lubricates, waterproofs and protects metal and non-metal surfaces such as rubber, plastic and vinyl.
Can you use white lithium grease on skateboard bearings?
White lithium grease – whatever you have on hand will likely work fine (some are better and you’ll figure it out). I would not use WD-40. If you have metal shields – done. if you have the plastic/rubber ones – remove and replace after lubricating them.
Can you over grease a bearing?
Overgreasing by applying too much grease to a bearing at one time can result in a seal failure and generate heat in the bearing housing. When too much grease is pumped into a bearing cavity, it eventually will become full. If there is no relief port on the housing, the grease will blow through the seals.