With these, you can attach the trucks firmly to your skateboard. You need 4 per truck, so each mounting kit contains 8 bolts and 8 nuts. This hardware is also called skateboard screws or skateboard bolts.
What are the metal things on skateboards called?
The Trucks
A skateboard truck is made of steel and is exceptionally resistant. Often, it outlives all the other components of a skateboard. The truck comprises several parts: the baseplate, the kingpin, the hanger, the bushings, and the axles.
What are skateboard parts called?
A skateboard is made up of three main parts: the board, or the deck, the wheels, and the trucks.
What is hardware on a skateboard?
Skateboard hardware, also known as mounting hardware, is used to connect the skateboard trucks to the skateboard deck. Each truck requires four bolts and locknuts. Hardware is sold in sets of eight, though you can purchase parts individually as needed. The screws may have an Allen or Phillips head.
What are skateboard bolts made of?
Bolts are made from full stainless steel and the nuts are made from steel coated in zinc (to avoid cold welding). PERFECT FOR EVERY RIDER | Fireball offers three types of bolt for every style skateboard. Use Allen for more strength and less stripping. Use Phillips for ease of installation.
How do I tighten my skateboard bolts?
Use a skate tool or other useful tool to tighten or loosen the big nut in the center of the truck.
- Turn it clockwise to tighten the trucks, getting tighter turning.
- Turn it counter-clockwise to loosen the trucks, getting a softer turning feel.
What size are skate bolts?
Bolt Sizing
The standard bolt size is 10-32. 10 refers to the standardized sizing by ANSI B1, and 32 refers to the thread count. There are 32 threads per inch. You’ll use bolt sizes in the 1-2″ range for most setups.
What are the 4 parts of a skateboard?
The Four Main Parts of a Skateboard: Trucks, Wheels, Deck, Bearings.
What is skate slang for?
noun Slang. a person; fellow: He’s a good skate. a contemptible person. an inferior, decrepit horse; nag.
What are skateboard terms?
Skateboarding Glossary
nose: the front of the skateboard, from the front truck bolts to the end. rail: the edge of the skateboard, also, plastic strips attached to the board’s underside. trucks: the front and rear axle assemblies that connect the wheels to the deck and provide the turning capabilities for the board.
Which skateboard bolts do I need?
Selecting the right bolt length is fairly simple. If you skate without shock or riser pads, you will only ever need 7/8” – 1” bolts. If you use standard shock pads, with a height of 1/8”, you’ll need 1” – 1 1/8” long bolts. The higher your shock pads, the longer your bolts need to be, of course.
How tight should deck bolts be?
Make sure that you don’t over tighten your hardware. Tighten them until they are flush with the top of the deck, but don’t counter sink them to where the top of the bolt is below the top of the deck.
Do skate trucks come with screws?
Skateboard trucks come with hardware so you can attach the board to the truck. There are many different types of skateboard trucks, so make sure you select a truck that is compatible with your board.
What size is a kingpin nut?
3/8"
These kingpin nuts are the standard size and will fit on most skateboard/longboard trucks that have standard kingpins. The thread size for these kingpin nuts is 3/8″ (standard).
Can you reuse skateboard hardware?
The bolts can be reused. The locknuts are really only good for locking once.
Why is my skateboard wobbly?
Wobbly skateboards are caused by bushings being too soft or the skateboard trucks being too loose. With just a few minor adjustments to the kingpin nut, you can solve this problem. It’s really easy to fix actually and some don’t even consider it a problem. Some people like loose trucks and others prefer them tight.
Why do skateboards squeak?
When you get friction in that spot from putting a lot of pressure on the baseplates by heavy turning, it can start to squeak. The best way to eliminate this annoying noise is by taking a few shavings of bar soap or wax and dropping them into the empty pivot cup (make sure you take your hanger out first).
Should skateboard trucks be tight or loose?
The faster you intend on riding, the tighter your trucks should be. Tight trucks provide stability at higher speeds, reducing the likelihood of catching the dreaded speed wobbles. If you’re considering riding downhill, or if a vert ramp session is in your future, consider tightening your trucks for safety’s sake.
What size is skate hardware?
Skateboard Hardware
The most common sizes of hardware are 7/8” (for use with no risers) and 1” (for 1/8” risers). These sizes of hardware should be sufficient to assemble most skateboard set-ups. If you’re using riser pads with a height larger than 1/8”, then longer hardware sets may be required.
What size are skateboard sockets?
The classic skate tool usually refers to handy all-in-one unit with a 1/2” socket for your wheels, 9/16” for your trucks, 3/8” for the board screw nuts and a Phillips head.
What is the hanger on skateboard trucks?
The hanger is the triangular metal piece that is the largest part of the skateboard truck, and supports the axle, which runs straight through it. The kingpin is the big bolt that fits inside the bushings and holds the skate trucks parts together.