There are a lot of different types of bushings but not all are suitable for every skateboard. If you ride a regular skateboard barrel/cone bushings with a hardness between 87A and 92A should be fine. Heavier riders should consider 94A, kids need softer bushings, 85A to 90A should work for most kids under 12.
What bushings should I use for my weight?
If you are riding at fast freeride and downhill speeds, you may want to get a slightly harder bushing durometer than the weight chart suggests or a more restrictive bushing shape.
LONGBOARD BUSHING DUROMETER CHART.
| Rider Weight | Bushing Durometer |
|---|---|
| <100 lbs | 78-80A |
| 100-125 lbs | 80-82A |
| 125-145 lbs | 82-87a |
| 145-175 lbs | 85-90a |
What size bushings do I need?
Another method of determining bushing size, is to measure the neck wall thickness of the cartridge cases with a ball type or tubing micrometer. Double this measurement and add the bullet diameter to calculate the neck diameter of a loaded cartridge. As above, subtract 0.001″ from this figure to determine bushing size.
What’s the difference between soft and hard bushings?
Softer bushings are easier for your hanger to compress, and therefore it is easier to turn on softer bushings. Harder bushings result in stiffer turns. Importantly, how tight or loose you keep your bushings also effects your skateboard’s turn responsiveness.
Do skateboard bushings matter?
Bushings are a very important part of skateboard trucks. Every truck is equipped with two bushings – the street-facing top bushing, and the board-facing bottom bushing. Like skateboard wheels, bushings are made of polyurethane, i.e. plastic.
Do bushings make a difference?
Car bushings are small suspension components that reduce friction between the metal parts of your vehicle. Made from shock absorbent materials, usually urethane or rubber, they are crucial to ensuring a smooth ride. Though they’re not the only reason your car might shake, they’re usually the prime suspect.
How long do skateboard bushings last?
Your skateboarding routines will determine the lifespan of your skateboard bearings. Taking good care of them can also make your bearings last longer. The average lifespan of skateboard bearings is 1 to 2 years if given proper care and maintenance.
Do I need hard bushings?
Harder bushings provide more resistance (better for larger riders) and softer bushings provide less resistance (better for smaller riders). Getting the correct durometer (hardness) for your bushings is the most important part in getting your trucks to perform the way you want them to.
How much is a bushing for a car?
Normally, a full car bushings replacement costs about $100-$500 for parts and labor.
How do you break in new skateboard bushings?
Spend your first few skate sessions either skating on flat ground or basic riding in a mini ramp. Adjust the trucks after a few days of breaking in the new bushings. As soon as your board starts to feel normal—no tightness or awkward pulling off to one side—tighten the trucks as you would normally ride them.
What hardness for bushing should I get?
There are a lot of different types of bushings but not all are suitable for every skateboard. If you ride a regular skateboard barrel/cone bushings with a hardness between 87A and 92A should be fine. Heavier riders should consider 94A, kids need softer bushings, 85A to 90A should work for most kids under 12.
How stiff should skateboard trucks be?
For stability while cruising, medium tightness is preferable. This should keep the trucks loose enough for turning. However, tighten the trucks if you tend to skate downhill or plan to do some practice rides on a steep slope or ramp.
Do skateboard bushings need washers?
Barrel & Cone (“Standard”) Bushing Combo
Cupped washers grip the bushings and reduce the “slop” in the turn. Simple as that! You’ll need a total of two large cupped washers and two small cupped washers for your board.
When should I replace my bushings skateboard?
Bushings commonly get worn out over time and start making your trucks floppy and unstable, which can cause you to get a lot of wheelbite. If your bushings are split or crushed on one or both sides, it’s probably worth replacing your bushings so you can get some more responsive turns and less flop.
Are doh doh bushings good?
Shorty`s Doh-Doh Bushings are made with the highest quality urethane of any skateboard bushing. They are molded with rounded edges, making them even more resistant to chipping. Doh-Doh’s are good for replacing worn out or broken bushings, or for upgrading your stock bushings for a more custom feel.
How long do rubber bushings last?
Theoretically, rubber bushings should last for about 15 years, and polyurethane bushings can last the vehicle’s lifetime.
What causes bushings to go bad?
Bushings are liable to become worn over time on various components due to friction, stress and age. Prolonged, recurrent exposure to engine heat can cause bushings to wear down at a hastened rate.
Why are my bushings squeaking?
Bushings can begin to squeak if the rubber becomes torn or dried out. This is a result of natural weathering overtime from the environment and contact with motor oil and other chemicals. Friction over time combined with the stress from driving and frequent movements can compound this issue.
What size trucks do you need for a 8.25 board?
Which trucks do I need? If you’re setting out to buy new trucks, you’ll find that each brand labels trucks differently. That means if you ride an 8.25-inch board then you’d need Independent 144s, Thunder 148s or Venture 5.6s (each have an axle length of 8.25-inches).
Why is my skateboard going sideways?
If your skateboard is constantly turning or leaning towards the left or the right, there are a couple of possible causes. The most likely ones are either the bushings in your trucks, or your hardware. Bushings are the hard, rounded plastic pieces in your trucks that squash down in the direction you are turning.
How do I make my bushings softer?
Unscrew the bolt holding the bushings in place and slide them right off. Heat up a pot of water on the stove. Place the bushings in the pot for 10 to 15 minutes. Turn off the heat and remove the bushings while they are still hot.