Skateboard hardware is usually made out of either aluminum or steel. The trucks, bearings, and the deck itself are all typically made out of aluminum. Steel is used for the hardware on the top of the deck, such as the bolts that hold the trucks in place.
What are skateboard bolts made of?
Bolts are made from full stainless steel and the nuts are made from steel coated in zinc (to avoid cold welding). PERFECT FOR EVERY RIDER | Fireball offers three types of bolt for every style skateboard. Use Allen for more strength and less stripping. Use Phillips for ease of installation.
What kind of bolts are skateboard hardware?
The standard bolt size is 10-32. 10 refers to the standardized sizing by ANSI B1, and 32 refers to the thread count. There are 32 threads per inch. You’ll use bolt sizes in the 1-2″ range for most setups.
What metal is used for skateboards?
3 types of metal are commonly used in skateboard trucks — aluminum, steel and composites, with the latter being the lightest.
What hardware do I need to build a skateboard?
You Need The Following Parts:
- Skateboard Deck.
- Grip Tape (your deck may already have this applied)
- Trucks.
- Truck Bolts.
- Wheels.
- Bearings.
- Skate tool or a selection of spanners.
Is all skateboard hardware the same?
Hardware comes in a couple different styles. The most common are phillips or allen-head hardware. They function exactly the same, but with the allen hardware you’ll need an 1/8 inch allen wrench to tighten them. Most allen hardware sets come with the proper wrench.
What is the best skate hardware?
The Best Skateboard Hardwares
- BESIY All-in-One Skate Tools.
- VJ Skateboards Cruiser Hardware.
- Fireball Dragon Skateboard Hardware.
- ELOS Skateboards Hardware.
- Bones TMPBO100 Skateboard Hardware.
- BESIY Longboard Cruiser Hardware.
- Ever Skateboard Hardware Bolts.
- Blank Skateboard Hardwar.
Can you reuse skateboard hardware?
The bolts can be reused. The locknuts are really only good for locking once.
What are skateboard axles made of?
Axle. The axle extends through the hanger. It is a continuous bar composed of titanium or steel that is used in manufacturing. The visible sections of the axle are where your wheels and bearings are attached.
What metal is used for skateboard trucks?
aluminum
Skateboard trucks are usually made of aluminum or other metal (steel, brass, or another alloy), though a few are made of nylon. Skateboard wheels are made of polyurethane (a synthetic rubber polymer).
Why is aluminium used for skateboard trucks?
Most skateboard trucks are made of aluminum. Aluminum is lightweight, biodegradable, and can grind well. With aluminum trucks, you will gain a better riding experience. In contrast, steel is heavier, stronger, and lasts longer, but it will weigh your deck down.
Which skateboard bolts do I need?
Selecting the right bolt length is fairly simple. If you skate without shock or riser pads, you will only ever need 7/8” – 1” bolts. If you use standard shock pads, with a height of 1/8”, you’ll need 1” – 1 1/8” long bolts. The higher your shock pads, the longer your bolts need to be, of course.
What size are skateboard hardware nuts?
These axle nuts are the standard size and will fit on all skateboard/longboard trucks that have 8mm axles (virtually every truck has the standard 8mm axle size). The thread size for these axle nuts is 5/16″.
What size is a kingpin nut?
These kingpin nuts are Produced with top quality materials and are standard size and will fit on most skateboard/longboard trucks that have standard kingpins. The thread size for these kingpin nuts is 3/8″ (standard).
What are shock pads made of?
Made out of fused together polyethylene pieces, Shock pad is a fall cushioning substrate. It has a spongy but firm feel which makes it perfect for use as an outdoor safety surface. Used under and around play equipment in schools and nurseries, shock pad is used to deliver what’s called a ‘critical fall height’.
What are the parts of a skateboard?
A skateboard is made up of three main parts: the board, or the deck, the wheels, and the trucks.
What size is standard skateboard hardware?
Skateboard Hardware
The most common sizes of hardware are 7/8” (for use with no risers) and 1” (for 1/8” risers). These sizes of hardware should be sufficient to assemble most skateboard set-ups. If you’re using riser pads with a height larger than 1/8”, then longer hardware sets may be required.
Do I need bushings on a skateboard?
Bushings are a very important part of skateboard trucks. Every truck is equipped with two bushings – the street-facing top bushing, and the board-facing bottom bushing. Like skateboard wheels, bushings are made of polyurethane, i.e. plastic.
Why do skateboards have risers?
Riser pads, or risers, are hard plastic pads that can be inserted between the skateboard trucks and deck to raise the overall height of the skateboard. They are used to avoid wheel bite, which occurs when the wheel rubs the skateboard deck during a turn or just after a trick.
How long should skateboard trucks last?
Trucks usually can last between 2 and 5 years depending on the quality and how aggressive you skate. What is this? Replace your skateboard wheels when they have flat spots, tears, and are irregular shaped. Rotating your wheels and swapping them around will make them last longer.
How long do thunder trucks last?
Usually they last about 6-8 months or so.