A skateboard T-Tool, or T Skate Tool, is a specialized tool that is used to tighten and loosen the trucks on a skateboard. The tool consists of two main parts: a handle and a socket. The handle is usually made of metal or plastic, and the socket is designed to fit over the kingpin nut on the truck.
What size wrench is a skate tool?
Innovative Design: 3 Size of Sockets
The skateboard T tool includes 3 different sizes of sockets (3/8″, 1/2″, 9/16″). It works with most types of the skateboards and long boards to adjust axle nuts, mounting hardware, and the kingpin nut on the top of the truck.
What is a skate socket?
The skater’s all-in-one tool often includes several sizes of sockets -usually 3/8”, 1/2”, and 9/16” – and works with the most common types of skateboards. The 1/2” socket is used to tighten or loosen the wheels, while the 9/16” socket will help you install or replace your trucks.
What is the metal thing on the skateboard called?
5. Bearings: Skateboard bearings are round metal discs that fit inside the wheels, mounting them to the axle. The inner and outer parts of the discs ride on interior balls, allowing wheels to turn.
What are the bolts called on a skateboard?
Bolt packs, hardware, shorties or simply nuts and bolts, connect the skateboard deck to the trucks, and are thus a very crucial part of your skateboard setup. Here, you can learn about the different kinds of bolt packs and how to find the right bolt length.
What does a skate tool have?
Skateboard tools usually include a variety of wrenches and screwdrivers that can be used to tighten or loosen hardware, as well as allen keys for adjusting hardware and some trucks. Some also come with built-in bearing presses for installing or removing bearings or axle rethreaders to fix damaged axles.
What size nut is on a skateboard truck?
The axle nuts are the standard size and will fit on all skateboard/longboard trucks that have 8mm axles (virtually every truck has the standard 8mm axle size). The thread size for these axle nuts is 5/16″.
Can I use socket wrench on skateboard?
All truck/deck mounting hardware use a 3/8″ Nut. But depending on what you have, the screw could be a 1/8″ Allen screw or a Philips head screw. To work on mounting hardware you will need a 3/8″ socket or flat wrench, and either a 1/8″ Allen wrench or Philips head screwdriver.
What size are skateboard hardware nuts?
These axle nuts are the standard size and will fit on all skateboard/longboard trucks that have 8mm axles (virtually every truck has the standard 8mm axle size). The thread size for these axle nuts is 5/16″.
What size are skateboard bolts?
Bolt Sizing
The standard bolt size is 10-32. 10 refers to the standardized sizing by ANSI B1, and 32 refers to the thread count. There are 32 threads per inch. You’ll use bolt sizes in the 1-2″ range for most setups.
What are the parts called on a skateboard?
A skateboard is essentially composed of three main parts – the deck, the trucks, and the wheels.
What is a skateboard pop?
Pop: The act of striking the tail of the board against the ground to propel the board upwards. Regular foot: A skater who more comfortably rides with the left foot leading.
How do you tighten skateboard trucks?
To adjust skateboard trucks, get a skate tool, or a spanner, and adjust the kingpin. The kingpin is the largest nut on the truck. Turn clockwise to tighten, and anti-clockwise to loosen. Adjust about a quarter turn at at time.
How do I tighten my skateboard bolts?
Use a skate tool or other useful tool to tighten or loosen the big nut in the center of the truck.
- Turn it clockwise to tighten the trucks, getting tighter turning.
- Turn it counter-clockwise to loosen the trucks, getting a softer turning feel.
What size is skateboard truck hardware?
The right size hardware for skateboard is 7/8″ for standard 7-ply decks without riser pads. 1/8″ riser pads require 1″ hardware and 1/4″ risers require 1 1/8″ hardware. Sometimes trucks have a thicker baseplate and 1″ is a better option. Both 7/8″ and 1″ flathead countersunk bolts always work.
What does a Rethreader do?
Damaged axles prevent you getting a wheel nut back on because that opening line of thread is no longer there for them to line up with. This is easily fixed with the rethreader tool which cuts through the damage and replaces the lost thread from the edge.
What size is a skateboard kingpin nut?
These kingpin nuts are Produced with top quality materials and are standard size and will fit on most skateboard/longboard trucks that have standard kingpins. The thread size for these kingpin nuts is 3/8″ (standard).
Is all skateboard hardware the same size?
The most common sizes of hardware are 7/8” (for use with no risers) and 1” (for 1/8” risers). These sizes of hardware should be sufficient to assemble most skateboard set-ups. If you’re using riser pads with a height larger than 1/8”, then longer hardware sets may be required.
How do you loosen tight skateboard wheels?
If the wheel comes to a sudden halt and rolls back slightly the other way, it’s too tight. Use the wrench to loosen the nut, but do so only slightly. Just nudge it counter clockwise and spin the wheel again. If it still comes to a quick stop, bump it backwards again.
How do I loosen my wheels without a skate tool?
As an alternative to the skate tool, take out:
- Wrench – Designed to tighten bolts and nuts.
- Pliers – Pliers may also be used; just be sure that it is enough to grip the nut on both sides, so you can tighten it or loosen it regarding your preference.
What is hardware on a skateboard?
Skateboard hardware, also known as mounting hardware, is used to connect the skateboard trucks to the skateboard deck. Each truck requires four bolts and locknuts. Hardware is sold in sets of eight, though you can purchase parts individually as needed. The screws may have an Allen or Phillips head.