When skaters refer to “concave” they are talking about the way that the board curves up at its edges, nose and tail. This curvature both strengthens the board and gives the rider more control of the board.
What is the concave side of a board?
Concave typically refers to the curvature across the width (short side) of the deck. Sometimes it also refers to the curvature of the kicknose and kicktail. “Mellow” concave means that the curvature is relatively flat.
Are all skateboards concave?
Some like flat, others medium while some goes for that deep concave! We refer to the concave as the up and down curvature of the edge & surface of the deck. If you take a look at your board from the side, you will directly note that the wood curves where the nose and the tail and also side to side.
What skateboard concave should I get?
The most popular deck preference is a “medium” or “mellow” concave. This design provides a sweet spot that’s not too flat, and not too steep. This creates a board that’s easy to catch, and flick without sticking to your feet. A medium concave is the favored variety for flip tricks and street skating.
Should a skateboard be concave?
While much of it is preference, flatter boards generally more stable and easier to control, making them better for cruising or transition skating. Deeper concave gives better grip and maneuverability for flip tricks and technical skating.
Which side of deck board goes up?
This then leads us to the most debated question about installing deck boards: crown up or down. The direction affects how the boards shape over time – cupping or crowning. Deck boards should crown up – bark side down.
Which way does wood curl?
Dried lumber will tend to “cup” forming a concavity opposite the “bark side” of a flat–sawn board. But even that golden rule is not always true, for sometimes the “cup” will form on the bark side (see Figure 5). This is particularly important to contemplate when assessing wood.
Is high concave good?
Great for flips
A high concave is the most aggressive curve between the two edges. It is easier to exert pressure on the edges, making technical flip tricks easier.
What skateboard decks have the most concave?
Most chocolate decks have flatter concave and a smaller nose than Girl boards. They are great for people who like skating in both stances without having to worry too much about their nose and tail. Still though, unless mentioned, Chocolate decks aren’t twin types.
Are concave boards good for tricks?
If you’re planning on doing lots of flips tricks, a steep concave is probably best. Makes it easier to flip your board but feels less comfortable.
What are the strongest skateboard decks?
The strongest skateboard deck is the Lithe Slate 3 Deck. It consists of 2 layers of carbon fiber combined with maple wood. The tail and nose are reinforced with a hybrid polymer, making it very unlikely to chip or razor tail. Even a truck can’t snap it in half.
Why do skateboards have concave?
Concaves, Kicktails, Nose
When skaters refer to “concave” they are talking about the way that the board curves up at its edges, nose and tail. This curvature both strengthens the board and gives the rider more control of the board.
Is a 7 ply skateboard good?
Skateboard Decks come in all shapes and sizes, all kinds of colors and widths, and can be made of different kinds of materials. Basically, a good skateboard is made of 7 ply Canadian Rock Maple wood, by a reputable manufacturer. Let’s have a look at what makes a good skateboard.
What is a mellow concave?
Concave typically refers to the curvature across the width (short side) of the deck. Sometimes it also refers to the curvature of the kicknose and kicktail. “Mellow” concave means that the curvature is relatively flat. (“Steep” concave, on the other hand, means that the curvature is much more noticeable.)
Which way does decking go down?
What is the correct way to lay decking? Any decking board manufacturer or professional will tell you: “The proper way to install a decking board is ridge side down.” The ridges are designed to allow for airflow, to stop moisture sitting in the ridge, and allow for a stronger structure.
What is the gap between deck boards?
Determining Deck Board Spacing
When using wood decking, you want a gap of at least 1/8 of an inch after your decking has dried out. If you’re using decking that’s already been dried out, you can leave a 1/8-inch gap when you install. Many decks will use “green” wood, or wood that hasn’t been dried down or kiln dried.
Should you nail or screw deck boards?
Decking screws are better than nails when building a deck. Decking screws hold down your decking more securely than nails and will stop your decking from warping. Also, you can easily remove screws for deck maintenance without causing damage.
What causes curl in wood?
Wood curls are caused from the fact that trees don’t grow straight. If all hardwood trees grew perfectly straight, the grain patterns would be straight. Since they don’t, figure such as curls appear. Curls produce a 3d appearance that’s caused by alternating stripes of the wood’s hard and soft fibers.
Which side of board is cup?
Therefore, wet lumber will tend to cup toward the bark side as it dries. Kiln-dried lumber, on the other hand, is usually surfaced after the lumber has been dried, and will tend to cup away from the bark side as it gains moisture.
Why is wood bowed?
A piece of wood can warp, or become misshapen, if it loses moisture at different rates from one area or another. This unbalanced drying means that the wood in the drier area shrinks and pulls against the wetter areas, leading to a bowing or warping in the lumber.
Which skateboard is best for tricks?
A shortboard, as opposed to a longboard or cruiser, is ideal for street skateboarding and vert skateboarding. It also remains the very best option for doing tricks, whether you are a beginner or a pro.