The skateboard T tool includes 3 different sizes of sockets (3/8″, 1/2″, 9/16″). It works with most types of the skateboards and long boards to adjust axle nuts, mounting hardware, and the kingpin nut on the top of the truck.
Are there different size skate tools?
The skater’s all-in-one tool often includes several sizes of sockets -usually 3/8”, 1/2”, and 9/16” – and works with the most common types of skateboards. The 1/2” socket is used to tighten or loosen the wheels, while the 9/16” socket will help you install or replace your trucks.
What size nut is skate hardware?
These axle nuts are the standard size and will fit on all skateboard/longboard trucks that have 8mm axles (virtually every truck has the standard 8mm axle size). The thread size for these axle nuts is 5/16″.
What size screw is skate hardware?
The standard bolt size is 10-32. 10 refers to the standardized sizing by ANSI B1, and 32 refers to the thread count. There are 32 threads per inch. You’ll use bolt sizes in the 1-2″ range for most setups.
Can you use a wrench as a skate tool?
The best skateboard tool for tightening the trucks is the wrench. The wrench is designed to fit perfectly onto the axle nuts, making it easy to tighten or loosen them as needed. It’s also small and lightweight, so it won’t take up much space in your skate bag.
What are skate tools called?
The skate wrench comes in many different shapes and sizes but is essentially the same regardless. Most skate wrenches will be comprised of 4 main components: 1) Kingpin adjustment: this will be the largest gauge socket on your skate wrench and is used to tighten or loosen your kingpin.
Are all roller skate tools the same?
There are many different options when it comes to skate tools, and they do not all perform the same function.
What size wrench are skateboard trucks?
A 9/16” wrench (or socket wrench) is used to adjust the kingpin bolt which holds the trucks of the skateboard together. This is tightened or loosened to adjust the tightness of the skateboard’s trucks. The wheel bolts use a 1/2” wrench and the board screw nuts use a 3/8” wrench.
What size is a skateboard kingpin nut?
3/8"
These kingpin nuts are the standard size and will fit on most skateboard/longboard trucks that have standard kingpins. The thread size for these kingpin nuts is 3/8″ (standard).
What size is a skateboard axle?
The Axle will be wider than the hanger width, the exposed axle will typically measure around 1.375″ / 35mm each side or 2.75″ / 70mm combined (Fig 2.).
What size skateboard bolts do I need?
Selecting the right bolt length is fairly simple. If you skate without shock or riser pads, you will only ever need 7/8” – 1” bolts. If you use standard shock pads, with a height of 1/8”, you’ll need 1” – 1 1/8” long bolts. The higher your shock pads, the longer your bolts need to be, of course.
Does skate hardware matter?
Skateboard hardware is what keeps your trucks secured to your skateboard deck and are essential to your setup. It’s easy to make mistakes when choosing hardware so we created this guide to help make sure you select the right bolts for your setup.
How do I know what skate hardware to buy?
The right size hardware for skateboard is 7/8″ for standard 7-ply decks without riser pads. 1/8″ riser pads require 1″ hardware and 1/4″ risers require 1 1/8″ hardware. Sometimes trucks have a thicker baseplate and 1″ is a better option. Both 7/8″ and 1″ flathead countersunk bolts always work.
What can I use if I don’t have a skate tool?
You don’t necessarily need a skate tool, but at the very least you need 3 different sized wrenches, 1 screwdriver, and 1 size of Allen key. The nice thing about a skate tool is that it has all of these tools built into 1 convenient and easy to carry tool.
How can I loosen my truck without a skate tool?
As an alternative to the skate tool, take out:
- Wrench – Designed to tighten bolts and nuts.
- Pliers – Pliers may also be used; just be sure that it is enough to grip the nut on both sides, so you can tighten it or loosen it regarding your preference.
Can you put a skateboard together without a skate tool?
You can use a skate tool or the axles of your trucks to pop them in place, make sure you put them in all the way, they shouldn’t stick out. You should also use spacers to protect your bearings from getting crushed when you tighten the axle nut. Tools you need; A skate tool or your hands and your truck’s axle.
What is a skate key?
skate key (plural skate keys) A small wrench used to adjust old-fashioned roller skates of the kind that were fitted to the wearer’s shoes. A small, sometimes key-shaped wrench used to adjust skateboards.
Can you use skateboard tool on roller skates?
Multifunctioning skateboard tool. This tool allows you to adjust axle locknuts, work with the mounting hardware as well as a kingpin nut. This tool will allow you to assemble and disassemble skateboards, roller skates and longboards.
Do skate tools work on longboards?
COMPATIBLE WITH ANY SKATEBOARD: This all in one tool works perfectly on any type of skateboard, longboard or cruiser. It allows you to adjust axle nuts, mounting hardware, and kingpin nuts for complete skateboard assembly.
What tools do I need to adjust my roller skates?
Using a skate tool or 1/2” socket wrench, being careful not to push on the bearing with the tool, tighten the loose nut down a tiny bit at a time until the wheel still spins fully freely but has very little play on the axle and is quiet when you shake the skate.
How often should you replace roller skate bearings?
every 1-3 months
When: Depends on several factors, but usually every 1-3 months. Why? Skate bearings help your wheels roll freely, but the more you skate, the more debris gets stuck in the bearings and causes friction—the opposite of what you want!