FIND THE RIGHT SIZE SKATE PARTS
| Deck Size | truck Size | Wheel Size |
|---|---|---|
| 8.0 | 7.75 – 8.25 Axles | 50 – 54 mm |
| 8.125 | 8.0 – 8.25 AXLES | 50 – 54 mm |
| 8.25 | 8.0 – 8.5 axles | 52 – 55 mm |
| 8.375 | 8.25 – 8.5 axles | 52 – 55 mm |
What size trucks are good for a 8.0 deck?
5.25" truck
For the perfect truck size, you are aiming to match the overall truck width to the deck width, for example, a 7.75″ deck matches a 5.0″ truck, an 8.0″ deck matches a 5.25″ truck.
How big should my wheels be on my skateboard?
The most popular street skating wheel sizes are between 52-54mm. A larger wheel helps you skate rougher ground and ride up transitions easier. You can still skate street with larger wheels, but it will result in your skateboard feeling heavier.
Are 52mm wheels good for tricks?
So back to the 52 & 54mm wheels we mentioned as a go to, if you are mostly skating a brand new smooth skatepark and would like to get into ollies, flips and ledge tricks, run the 52mm.
Are 54mm wheels good for tricks?
The 54mm wheels are suitable for beginners when playing short longboard or cruising. It can be using all ground, ramps, sidewalk, smooth concrete or asphalt. [GREAT WHEELS FOR TRICKS] The premium wheels with high quality bearings help you do street tricks very well.
What happens if your trucks are bigger than the deck?
The trucks should always fit the width of your Skateboard. It’s important that they’re not much wider than the deck because otherwise, the centre of gravity will shift to the side of the deck. This may have an effect on flip tricks and can affect the general boardfeel.
What happens if your trucks are too small?
What Happens When Your Trucks Are Too Narrow. When you’re trucks don’t match your board and aren’t wide enough you’ll get the carpet riding effect. You won’t be able to see your wheels, just your deck. Just a tad too small doesn’t really matter but at a certain point, you’ll run into trouble.
Is it harder to ollie with bigger wheels?
If the wheels are too big you’ll have a hard time landing tricks and the wheels might come into contact with your board. On average you should pick wheels between 52 and 54 millimeters depending on what and where you skate.
Are 60mm wheels good for tricks?
Diameter 50-60mm, Durometer 95-101a
These hard wheels are the best skateboard wheels for park and street skating because they are lightweight, roll fast on smooth surfaces, and slide easily. This makes it easier to do ollies, flip tricks, power slides, and other technical tricks.
Are 54mm wheels good for cruising?
Go for at least 56mm/92A if you want to ride comfortably and do tricks. Go for 58MM+ and 86A (and below) for a better cruising experience. Ricta’s at 60mm, 78A durometer and a contact patch of 32mm should provide a smooth ride. Still, if you only want to cruise go with Fatty Hawgs, Orangatangs or OJ Juice.
What size wheels does Tony Hawk Ride?
53-56mm
53-56mm The 53-56mm wheels are the more common wheel size for beginners or bigger riders skating street, skate parks, bowls and vert ramps.
Are 57mm wheels good for street skating?
Wider, larger wheels (60mm-70mm) are great for outdoor traction and indoor speed. Smaller wheels (57mm) are needed for artistic or rhythm skating because while slower, they offer greater maneuverability.
Are 101A wheels too hard?
The harder smaller skateboard wheels are mostly between 97A and 104A. The most popular wheels in this category are 99A to 101A. Hard wheels have a very slippery, plasticy feel. They are smooth and fast on smooth surfaces, but are chattery and unpleasant to ride on rough terrain.
Are 52mm wheels good for street?
The 52mm wheel size is a great option for street skating. They offer good speed and maneuverability, and can handle rough terrain well. However, they may not be the best choice for beginners, as they can be difficult to control.
What are 53mm wheels good for?
50-53 mm: Smaller wheels with these measures are typically used for street and street influenced parks, as well as small riders and boards. With wheels in these sizes, speed is not the goal, but being able to come closer to the ground and the grind edges in order to make it easier to pop tricks.
Why do skaters flip their wheels?
Reversing the wheels simply extends their life by switching the unworn side to the inside. Junior skaters and those on a budget do this, I would expect that high-level skaters simply replace wheels as soon as they wear.
Is it better to have trucks that are too big or too small?
As a general rule of thumb, if they think you’ll be in-between sizes, go for the larger truck. It’s better for you (and way less stressful) to work with a little bit of extra space than a little bit too small of a space.
What size trucks do I need for a 8.75 deck?
Size Guide – Skateboard Trucks
| Skateboard Truck Size Guide | ||
|---|---|---|
| Deck Size | Hanger Width | Ace |
| 7.75 to 8.25″ | 137mm / 5.25″ | 33 |
| 8.25 to 8.75″ | 149mm / 6″ | 44 |
| 8.75 to 9.75″ | 160mm / 6.3″ | 55 |
Do hollow trucks make a difference?
Hollow Trucks and Titanium
Lighter trucks won’t help you ollie higher, but aluminum is usually stronger than the mix of metal trucks are made out of. Hollows aren’t that much more expensive as regular trucks but there isn’t a difference in performance.
How tight should trucks be for tricks?
They should be loose enough that you will not struggle to move around obstructions while skateboarding. At the same time, they should not be too tight, or your bushings might burst at any moment. Overall, it’s important to achieve balance in this area.
How do you tell if my trucks are too loose?
A good test to see if your trucks are too loose is to lean with your full weight on one side of the skateboard. If the wheel can touch your board, then your trucks are definitely too loose. Even if your wheel cannot touch your board, you might need to tighten your trucks to regain some stability.