52 – 55 mm.
FIND THE RIGHT SIZE SKATE PARTS
| Deck Size | truck Size | Wheel Size |
|---|---|---|
| 8.0 | 7.75 – 8.25 Axles | 50 – 54 mm |
| 8.125 | 8.0 – 8.25 AXLES | 50 – 54 mm |
| 8.25 | 8.0 – 8.5 axles | 52 – 55 mm |
| 8.375 | 8.25 – 8.5 axles | 52 – 55 mm |
What is the best wheel size for a 8.25 deck?
Wheels. Wheel sizes for technical skating should go around 52mm to 54mm. Also, they should be tough enough with 99a to 104a durometer hardness level. Most professional skateboarders prefer this setup because they’re fast and ideal for parks.
What size wheels do you need for an 8.5 deck?
With an 8.5 board I use Independent 149s or Ace 55. Wheels are going to be a personal preference here; if you ride loose trucks you’ll need a smaller wheel to prevent wheelbite. You want to match the deck width, or be a little bit ‘short’ on the axle length.
How big should my wheels be on my skateboard?
The most popular street skating wheel sizes are between 52-54mm. A larger wheel helps you skate rougher ground and ride up transitions easier. You can still skate street with larger wheels, but it will result in your skateboard feeling heavier.
Are 54mm wheels good for street skating?
54mm is probably the best all rounder if you are looking at skating a big variety of terrain. This size seems to provide most skateboarders with the perfect blend of speed and acceleration. This really is the Goldilocks zone of wheel size choice.
Is it harder to ollie with bigger wheels?
If the wheels are too big you’ll have a hard time landing tricks and the wheels might come into contact with your board. On average you should pick wheels between 52 and 54 millimeters depending on what and where you skate.
Is an 8.25 skateboard too big?
It is recommended that you start with a skateboard deck width that is proportional to your shoe size. A deck of between 8.0 and 8.5 inches is suitable for someone wearing shoes size of 9.5 or larger. There is a noticeable difference for an experienced skater between an 8.25 and an 8, but not so much for a beginner.
What size wheels does Tony Hawk Ride?
53-56mm
53-56mm The 53-56mm wheels are the more common wheel size for beginners or bigger riders skating street, skate parks, bowls and vert ramps.
What are 99A wheels good for?
This is the most common durometer found in skateboard wheels used for shortboards. Great speed and good grip, these wheels are a good choice for someone looking to do tricks, skate parks, but still want something good for the streets.
Are 52mm wheels good for street?
The 52mm wheel size is a great option for street skating. They offer good speed and maneuverability, and can handle rough terrain well. However, they may not be the best choice for beginners, as they can be difficult to control.
Are 54mm wheels good for cruising?
Go for at least 56mm/92A if you want to ride comfortably and do tricks. Go for 58MM+ and 86A (and below) for a better cruising experience. Ricta’s at 60mm, 78A durometer and a contact patch of 32mm should provide a smooth ride. Still, if you only want to cruise go with Fatty Hawgs, Orangatangs or OJ Juice.
Do bigger skateboard wheels go faster?
Get bigger (taller) wheels
In a race, a skateboarder will get off the line quicker (faster acceleration), but a longboarder will eventually pass them as their taller (bigger) wheels allow them to have a higher top speed.
Are 100a wheels good for street skating?
Diameter 50-60mm, Durometer 95-101a
These hard wheels are the best skateboard wheels for park and street skating because they are lightweight, roll fast on smooth surfaces, and slide easily. This makes it easier to do ollies, flip tricks, power slides, and other technical tricks.
Can you ollie with cruiser wheels?
You can ollie with cruiser wheels, but you need to know what you are doing. If you’re good at ollieing a popsicle skateboard, you won’t have any problems ollieing with cruiser wheels. The biggest con is that the softer wheels can throw you off your board.
Are 57mm wheels good for street skating?
Wider, larger wheels (60mm-70mm) are great for outdoor traction and indoor speed. Smaller wheels (57mm) are needed for artistic or rhythm skating because while slower, they offer greater maneuverability.
Why do skaters flip their wheels?
Reversing the wheels simply extends their life by switching the unworn side to the inside. Junior skaters and those on a budget do this, I would expect that high-level skaters simply replace wheels as soon as they wear.
Do risers increase Pop?
Deciding whether or not to install risers
Shortboarders may also use them to prevent wheel bite after landing a skate trick, thus prolonging the life of their board. They also have the added bonus of giving your board extra pop, since they add more distance between the tail and the ground.
Do risers make tricks harder?
Riser pads are fine for skateboards as long as you stick with 1/16″ shock pads or 1/8″ riser pads. While they prevent wheel bite, they also make landing tricks a lot harder and make your ride very unstable. It’s better to get smaller wheels instead of adding risers.
What is a 8.25 deck good for?
7.50″ to 8.00″: Medium deck width for teen or adult riders skating street terrain or doing more technical tricks. 8.00″ to 8.50″: Ideal for various street and transition terrain. Parks, pools, rails, stairs. 8.50″ and up: Wider decks great for transition skating, bigger street tricks, pools, or just cruising.
Is a 8.25 skateboard good for beginners?
For beginners, I recommend going for an 8.25 or 8.5. Wider decks provide more stability when you’re a newbie. When you know the basics, you could always move on to a narrower deck. Wider boards don’t flip and pop as easily as a narrow deck, but don’t worry about that for now.
Should I get an 8 or 8.25 skateboard?
If you wear shoes 9.5 or larger, we recommend getting a deck between 8.0 and 8.5 inches. In general, skaters who like flip tricks, manuals, ledges, flat bars and technical tricks usually prefer boards on the narrower side of the spectrum (7.75 – 8.25 inches).