Pull the HEPA filter out by the grey plastic tab in the middle of the grate with your hands.
Does the Shark lift-away Deluxe have a HEPA filter?
LIFT-AWAY FUNCTIONALITY: Detachable pod for cleaning under furniture or detach the nozzle to clean above the floor, on upholstery, furniture, stairs, and more. ANTI-ALLERGEN COMPLETE SEAL TECHNOLOGY: Works with a HEPA filter to trap dust and allergens inside the vacuum cleaner.
How many filters does a Shark lift-away vacuum have?
The package comes with 1 HEPA filter, 3 foam filters, 3 felt filters.
Do I need to replace the HEPA filter in my Shark vacuum?
Under normal usage, the HEPA Filter will require replacement once every three (3) months, however, vacuuming large amounts of extremely fine dust, powder or similar material over a long period of time may decrease airflow performance through the filter.
Can you wash the HEPA filter on a Shark?
All of the filters that come with your Shark vacuum, including HEPA filters on models that include them, can be cleaned or washed for re-use.”
How do I clean my Shark vacuum lift away?
Empty the dust cup each time you vacuum and periodically during cleaning, if debris reaches the MAX fill line. Remove the dust cup using the release button(s), hold it over a bin and press the latch to empty the contents into the bin. Make sure you remove any debris build-up if needed.
Is Shark Lift-Away HEPA?
The Shark Navigator Lift-Away is decent for pets. It does a fantastic job of cleaning pet hair on bare floors as well as low and high-pile carpet. Also, it comes with an allergen-trapping HEPA filter, which is helpful if you have a heavily-shedding pet at home.
When should I replace my Shark HEPA filter?
We recommend changing the HEPA filter every six months.
Does Shark lift away have a filter?
The Shark Rotator Powered Lift-Away has multiple filters to ensure a better clean as compared to other models. This vacuum has a foam and felt filter which should be cleaned every three months so that the vacuum can perform at its best.
Where are the filters in my Shark vacuum?
Most Shark vacuum models have an additional filter—a HEPA filter. This is located on the lower front of the machine behind the filter grill (door). Firmly pull the door off to reveal the HEPA filter and pull out the filter. Rinse the filter well in clear water and allow it to dry fully.
Can you wash a HEPA filter?
Wash your HEPA filter with warm water and allow it to dry if your model specifically states that water cleaning is safe. You can also soak your filter in hot water if it is extremely dirty. Clean non-washable, permanent HEPA filters using a vacuum to remove dust and debris.
How do you clean a Shark filter?
To clean foam and felt filters, simply tap off loose dirt, then rinse them under a tap. Only use water – do not use soap. Always let the filters air dry completely before reinserting them. You can also tap loose dirt off filters between washes as needed.
Can I rinse out my Shark canister?
The dust canister on Shark cordless vacuum models can also be rinsed in warm water for cleaning. Place it on its side with the lid open once done, allowing it to air-dry for at least 24 hours before use.
Why has my Shark vacuum lost suction?
If both your foam filter and felt filter have not been cleaned in the past month, this may be why your vacuum has lost suction. To clean the foam and felt filters, remove the dust cup and pull out the two filters that are on the top of the motor base. Rinse the filters with lukewarm water until the water runs clear.
Can you wash the Shark air purifier filter?
Simply tap off loose dirt and then rinse them under a tap. Only use water – do not use soap. Always let the filters air dry completely before reinserting them. You can also tap loose dirt off filters between washes as needed.
Where is the HEPA filter on a Shark Navigator?
Step 1 HEPA Filter
Press the latch below the HEPA filter on the bottom of the front body of the vacuum and pull outwards with your hands. Pull the grey and blue plastic cover down and away with your hands.
How do I know if my HEPA filter is dirty?
How do I know if my HEPA filter is dirty? Open up the air purifier and remove the pre-filter. Your HEPA filter will have heavy clumps of dirt and dust and it’ll look black if it’s dirty. That’s an indication that your filter needs cleaning or replacement.
What does a dirty HEPA filter look like?
If you see a visible buildup of dust or particles on a HEPA filter (it may look gray or dirty) or observe reduced airflow through your portable air purifier, you may assume that’s an indication the HEPA filter needs cleaning. However, experts say HEPA filters should always be replaced rather than cleaned.
Can you clean a HEPA filter and reuse it?
You can try to clean them and reuse them, even if the brand says to discard them after use, but be aware that they won’t be operating with the same thoroughness afterwards. There are a few different methods you can use to clean your HEPA filter.
How long does a HEPA filter last?
6-12 months
Although it depends on the specific filter you have, as a rule of thumb, replaceable HEPA filters should be replaced every 6-12 months, depending on air quality and environmental factors. Carbon pre-filters should be replaced every 3 months, depending on air quality and environmental factors.
Why is my HEPA filter black?
Your air filter is black because of soot. Your air filter is black because of soot. This sounds scary, but, it’s usually no big deal. The good news is that, if your filter is black with soot, it means it’s doing its job.